The Swiss-made Yocto MaxiThermistor is an USB interface for NTC and PTC thermistor. It can measure up to six temperature points. Each of the six channels can be configured independently thanks to tables or reference temperatures and β coefficients. The Yocto MaxiThermistor is an insulated device: there is an electric insulation between the sensor part and the USB part.
The Yocto MaxiThermistor is shipped with six tiny NTC thermistors connected to a 10 centimeter wire. You can extend them with any regular electric wire.
The six channeld terminal block allow the use of 30-18 AWG wire. If you need to use bigger wire, choose the Yocto Termistor-C.
The Yocto MaxiThermistor can also be used as a multichannel ohm-meter.
This device can be connected directly to an Ethernet network using a YoctoHub Ethernet, to a WiFi network using a YoctoHub Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub GSM.
USB cables and enclosure to be ordered separately from THRMSTR2 Yocto MaxiThermistor.
Specifications of Yocto MaxiThermistor
Manufacturer Product Number – THRMSTR2
Product name – Yocto-MaxiThermistor
Width – 58mm
Length – 50mm
Weight – 14g
USB connector – Micro-B
Channels – 6
Refresh rate – 1Hz
Measuring range – 100Ω…500KΩ
Accuracy, typical (Ω) – 1%
USB bus insulation – 1.5kV
Accuracy (Ω) between – 1KΩ…10KΩ~0.1%
Supported Operating Systems Windows – Linux (Intel + ARM), Mac OS X, Android
Drivers – no driver needed
API / SDK / Libraries (USB+TCP) – C++, Objective-C, C#, VB .NET, Delphi, Python, Java/Android
RoHS – yes
Suggested enclosure – YoctoBox-MaxiIO-Transp
Made in Switzerland