HIN1001_0 Touch Wheel Phidget

0 out of 5 based on 0 customer ratings


Use this capacitive touch wheel and buttons as an intuitive user interface to your Phidgets system.


Need a user-friendly control panel for your Phidgets project? Look no further than the HIN1001_0 Touch Wheel Phidget. This user interface board uses capacitive touch technology, similar to the touchscreen on a smartphone. Capacitive touch sensors such as this can detect a touch through a piece of glass or plastic of up to 3mm thick, so you can hide this board inside an enclosure or behind a panel.

SKU: HIN1001_0


This board has four touch buttons and one fully-functional scroll wheel pad. Whenever a button or the scroll wheel is initially touched, an event is fired in software, allowing you to react immediately to the change. The scroll wheel also generates an event whenever your finger’s position changes as you slide it across the wheel. You can also adjust the sensitivity of the board to avoid missed touches or unintentional touches.


Product Specifications for HIN1001_0 Touch Wheel Phidget

Sensor Properties
Controlled ByVINT
Detecting Distance Max5 mm
Sampling Interval Min20 ms/sample
Sampling Interval Max 250 ms/sample
Electrical Properties
Current Consumption Min20 microA
Current Consumption Max2 mA
Physical Properties
Operating Temperature Min-40 å¡C
Operating Temperature Max85 å¡C

Sensitivity Settings

Sensitivity (0-1)Application
0.8 – 1.0Behind up to 3mm of glass
0.2Inside default enclosure