YHUBWLN2 YoctoHub-Wireless-SR

0 out of 5 based on 0 customer ratings

$120.88

The YoctoHub Wireless-SR is a wireless-enabled module that can host three Yoctopuce modules to access them remotely through a Wifi network. It can be powered either by a USB Micro-B cable and a regular phone charger, or a 5V battery pack.

The YoctoHub Wireless-SR can be used in the same way as a VirtualHub running on a little PC, but it is much easier to setup and maintain than a PC. It smaller and consume less. It is compatible out-of-the-box with all existing applications using Yoctopuce API. As for the VirtualHub, it can run autonomously using HTTP callbacks.

Moreover, the YoctoHub Wireless-SR features a built-in clock timer, that makes it possible to put the device into low-power deep sleep and wake-up automatically at predefined time. This makes it possible to reduce power consumption to 15uA while sleeping, which is crucial for applications running on battery or solar panels. The YoctoHub Wireless-SR only needs a few seconds of wake-up time to post data on an web server using the HTTP callback.

Three Yoctopuce modules can be connected directly, one of which can be fixed directly on the YoctoHub-Wireless-SR and connected using a Board2Board-127 connector. More devices can be connected thanks to the YoctoHub-Shield extension. The YoctoHub-Wireless-SR can power Yoctopuce devices up to 2A.

Contrarily to the YoctoHub-Wireless, which looks very similar, this version does not include an antenna connector but uses a tiny antenna directly integrated on the PCB. It takes less space, but should only be used in applications when there is a good wireless connectivity, away from any strong electromagnetic interference.

Warning: although the 3 downstream ports hosting Yoctopuce devices use USB micro-B connectors, the YoctoHub Wireless-SR use a specific protocol simpler than USB to talk to the devices. Therefore, it is not possible to drive or even to power a regular (non-Yoctopuce) device using the YoctoHub Wireless-SR. It is not possible neither to use a regular USB hub (such as the Micro-USB-Hub) on the downstream ports. If you need more downstream ports for Yoctopuce devices, you can use a YoctoHub-Shield.

Compare

SKU: YHUBWLN2

Categories: , ,

Tag:

The YHUBWLN2 YoctoHub-Wireless-SR is a Swiss-made wireless-enabled module that can host three Yoctopuce modules to access them remotely through a Wifi network. It can be powered either by a USB Micro-B cable and a regular phone charger, or a 5V battery pack.

The YoctoHub Wireless-SR can be used in the same way as a VirtualHub running on a little PC, but it is much easier to setup and maintain than a PC. It is smaller and consumes less. It is compatible out-of-the-box with all existing applications using Yoctopuce API. As for the VirtualHub, it can run autonomously using HTTP callbacks.

Moreover, the YoctoHub Wireless-SR features a built-in clock timer, that makes it possible to put the device into low-power deep sleep and wake-up automatically at predefined time. This makes it possible to reduce power consumption to 15uA while sleeping, which is crucial for applications running on battery or solar panels. The YoctoHub Wireless-SR only needs few seconds of wake-up time to post data on an web server using the HTTP callback.

Three Yoctopuce modules can be connected directly, one of which can be fixed directly on the YoctoHub Wireless-SR and connected using a Board2Board-127 connector. More devices can be connected thanks to the YoctoHub Shield extension. The YoctoHub Wireless-SR can power Yoctopuce devices up to 2A.

Contrarily to the YoctoHub-Wireless, which looks very similar, this version does not include an antenna connector but uses a tiny antenna directly integrated on the PCB. It takes less space, but should only be used in applications when there is a good wireless connectivity, away from any strong electromagnetic interference.

Warning: although the 3 downstream ports hosting Yoctopuce devices use USB micro-B connectors, the YoctoHub Wireless-SR use a specific protocol simpler than USB to talk to the devices. Therefore, it is not possible to drive or even to power a regular (non-Yoctopuce) device using the YoctoHub Wireless-SR. It is not possible neither to use a regular USB hub (such as the Micro-USB-Hub) on the downstream ports. If you need more downstream ports for Yoctopuce devices, you can use a YoctoHub Shield.

USB cables and enclosure to be ordered separately.

Specifications of YHUBWLN2 YoctoHub Wireless-SR

  • Manufacturer Product Number – YHUBWLN2
  • Product name – YoctoHub-Wireless-SR
  • Thickness – 8.1mm
  • Width – 58mm
  • Length – 60mm
  • Weight – 30g
  • USB connector – micro-B
  • Channels – 3ports
  • Max current (Cont.) – 2A
  • USB consumption – 110mA
  • Supported Operating Systems – Windows, Linux (Intel + ARM), Mac OS X, Android
  • Network connection – 802.11b
  • Drivers – no driver needed
  • API / SDK / Libraries – (USB+TCP)C++, Objective-C, C#, VB .NET, Delphi, Python, Java/Android
  • API / SDK / Libraries – (TCP only)Javascript, Node.js, PHP, Java
  • RoHS – yes
  • Suggested enclosure – YoctoBox-HubWlan-Transp
  • Made in – Switzerland

SKU: YHUBWLN2
TITLE: YoctoHub-Wireless-SR