YoctoHub-GSM-4G/LTE was added to cart
The following products are required in order to use the YoctoHub-GSM-4G/LTE
The YoctoHub-GSM-4G is a wireless-enabled module that can host three Yoctopuce modules for access through a 4G (LTE-M or NB-IoT) or 2G cellular network. It can be powered either by a Micro-B USB cable and a regular phone charger, or a 5V battery pack.
For 4G, the YoctoHub-GSM-4G works on LTE bands 2, 3, 4, 5, 8, 12, 13 and 20 in LTE-M (LTE Cat M1) and NB-IoT (LTE Cat NB1) modes. For 2G, the YoctoHub-GSM-4G works on GSM bands 850 MHz, E-GSM 900 MHz,
DCS 1800 MHz and PCS 1900 MHz (quad band), in GPRS and EGPRS (EDGE) modes. For a detailed list of supported frequency bands by country, consult the Wikipedia pages https://en.wikipedia.org/wiki/LTE_frequency_bands and http://en.wikipedia.org/wiki/GSM_frequency_bands. Note that some countries have not yet deployed LTE-M and/or NB-IoT support.
You can use the YoctoHub-GSM-4G in the same way as a VirtualHub running on a little computer, but it is much easier to setup and maintain than a computer. It is smaller and consumes less power.It is compatible out-of-the-box with all existing applications using Yoctopuce API. As for the VirtualHub, it can run autonomously using HTTP callbacks.
Moreover, the YoctoHub-GSM-4G features a built-in clock timer, that makes it possible to put the device into low-power deep sleep and wake-up automatically at predefined times. This makes it possible to reduce power consumption to 15uA while sleeping, which is crucial for applications running on battery or solar panels. The YoctoHub-GSM-4G only needs a few seconds of wake-up time to post data on a web server using the HTTP callback.
You can connect three Yoctopuce modules directly, one of which can be fixed directly on the YoctoHub-GSM-4G and connected using a Board2Board-127 connector. More devices can be connected, thanks to the YoctoHub-Shield extension. The YoctoHub-GSM-4G can power Yoctopuce devices up to 2A.
The device is provided with an articulated antenna (9cm, with SMA connector) and a connection cable (uFL to SMA).
Warning: although the 3 downstream ports hosting Yoctopuce devices use micro-B USB connectors, the YoctoHub-GSM-4G uses a specific protocol simpler than USB to talk to the devices. Therefore, it is not possible to drive or even to power a regular (non-Yoctopuce) device using the YoctoHub-GSM-4G. It is not possible either to use a regular USB hub (such as the Micro-USB-Hub) on the downstream ports. If you need more downstream ports for Yoctopuce devices, you can use a YoctoHub-Shield.
Protection class, according to IEC 61140:class III
Normal operating temperature:5…40°C
Extended operating temperature1:-20…70°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Harmonized tariff code:8542.3190
GNSS receiver (for GPS and GLONASS satellites) with integrated data logger
Small USB module to read very precisely the output of two 4-20mA sensors. The device can convert the current measure to the equivalent physical measure on the fly, and includes a built-in datalogger.
That little USB driven buzzer can make sound and light, a convenient way to get your user’s attention.
This device provides 4 digital I/O isolated from the USB bus.
Isolated USB motor controller (ESC) for brushed DC motors 3…18V / 20A, with integrated current, voltage and temperature probes.
USB interface allowing to connect up to 6 thermistors, PTC or NTC.
Small device to measure the temperature with very high precision, using a PT100 temperature sensor (2, 3 or 4-wires supported). The device includes a built-in data logger to record measurements. The PT100 connection is electrically isolated from the USB bus.
USB interface driving an electromagnetic latching relay capable of switching directly mains powered appliances, up to 2000W.
That isolated device can decode PWM signals. It can be used as a pulse counter as well.
That device can generate two distinct PWM signals using a frequency between 1Hz and 1Mhz.