LIGHTMK3 Yocto Light-V3 – Lux Meter
LIGHTMK3 Yocto Light-V3 - Lux Meter was added to cart
The following products are required in order to use the LIGHTMK3 Yocto Light-V3 - Lux Meter
The Yocto Light-V3 sensor is a Swiss-made USB ambient light sensor (lux meter) which allows you to you measure ambient light up to 100’000 lux. Measurements can be directly read via USB or stored on the device internal flash for later retrieval when connected again by USB.
This device is a replacement for the Yocto-Light V1 which is not produced anymore. THe response to light is closer to human eye than the Yocto Light-V2.
This circuit has been designed so that the sensor itself can be moved further away from the USB by a few meters: simply split the board into two parts and solder a 4-wire cable on the designated pads.
This device can be connected directly to an Ethernet network using a YoctoHub Ethernet, to a WiFi network using a YoctoHub Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub GSM.
USB cables and enclosure to be ordered separately LIGHTMK3 Yocto Light-V3 – Lux Meter
Specifications of Yocto Light-V3
Manufacturer Product Number – LIGHTMK3
Product name – Yocto-Light-V3
Width – 20mm
Length – 35.5mm
Weight – 3g
Sensor – BH1751FVI
USB connector – Micro-B
Refresh rate – 4Hz
Measuring range – 0…100’000lux
Sensitivity – 0.25lux
Supported Operating Systems – Windows, Linux (Intel + ARM), Mac OS X, Android
Drivers – no driver needed
API / SDK / Libraries (USB+TCP) – C++, Objective-C, C#, VB .NET, Delphi, Python, Java/Android
RoHS – yes
Suggested enclosure – YoctoBox-Short-Thin-Black
Cables and enclosures available separately
Made in Switzerland
This USB module can read up to five push buttons, potentiometers or resistive sensors (photodiodes, etc)
This device provides 4 digital I/O isolated from the USB bus.
This tiny USB device can drive up to 146 smart RGB LEDs such as WS2812B, WS2812C and SK6812.
This device features 8 small solid state relays, ideal to drive high-power relays
Small USB-driven OLED display (light blue), for text, images (128×64 pixels) and animated sequences.
That isolated device can decode PWM signals. It can be used as a pulse counter as well.
Small USB-driven OLED display (light blue), for text, images (128×32 pixels) and animated sequences.
USB device featuring a 3D accelerometer, a 3D gyroscope and a 3D magnetometer, with built-in auto-calibration (including hard-iron interferences).
That device can generate two distinct PWM signals using a frequency between 1Hz and 1Mhz.
That little USB driven buzzer can make sound and light, a convenient way to get your user’s attention.