Yocto-0-10V-Tx was added to cart
The following products are required in order to use the Yocto-0-10V-Tx
The Yocto-0-10V-Tx is a USB device with two channels that can generate independent voltages between 0 and 10V, for instance to control dimmable LED drivers. Each channel can drive up to 20mA.
The two outputs share the same ground, but are galvanically insulated from the USB bus, even though they don’t need an external power supply. This allows you to drive main-powered equipment without risking to fry your computer.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
Protection class, according to IEC 61140:class III
USB insulation, dielectric strength (1 min.):1kV
Normal operating temperature:5…40°C
Extended operating temperature1:-30…85°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Harmonized tariff code:8542.3190
GNSS receiver (for GPS and GLONASS satellites) with integrated data logger
Ambient light sensor (luxmeter), for measuring light intensity from 0 to 100’000 lux, with built-in data logger.
Isolated 4-20mA generator. This is what you need to control by USB any device featuring a 4-20mA input.
This tiny device is an isolated current sensor, for both AC and DC. It is electrically isolated, and includes a built-in data logger.
USB device featuring a 3D accelerometer, a 3D gyroscope and a 3D magnetometer, with built-in auto-calibration (including hard-iron interferences).
Small USB module to read very precisely the output of two 4-20mA sensors. The device can convert the current measure to the equivalent physical measure on the fly, and includes a built-in datalogger.
Small USB module to read the output of two 0-10V sensors. The device can convert the voltage measure to the equivalent physical measure on the fly, and includes a built-in datalogger.
USB interface allowing to connect up to 6 thermistors, PTC or NTC.
USB interface driving a tiny electromagnetic relay capable of switching directly mains powered appliances, up to 1250W.
That isolated device can decode PWM signals. It can be used as a pulse counter as well.