USB Mini-Battery-Supervisor was added to cart
The following products are required in order to use the USB Mini-Battery-Supervisor
The USB Mini-Battery-Supervisor is a tiny circuit that enables the use of battery packs with low-power USB electronic appliances, maintaining USB port availability.
It regulates the voltage provided by the battery pack to 5 V.
It monitors the battery voltage to cleanly cut the appliance power supply when the battery is fully charged,in order to protect the appliance and the battery.
It makes it possible to connect simultaneously the battery and an external USB host to the appliance, for configuration and diagnostic purposes.
It features a rugged panel-mount USB Micro-B connector designed to integrate into the front panel of an enclosure.
Product ID: MUSBLDO0
Max current (Cont.):500 mA
Max current (peak):1.5 A
Threshold voltage:3.5 / 4.5 / 5 / 6.4 V
IEC protection class:class III
Normal operating temperature:5…40°C
Extended operating temperature1:-40…85°C
Harmonized tariff code:8542.3190
USB device featuring a 3D accelerometer, a 3D gyroscope and a 3D magnetometer, with built-in auto-calibration (including hard-iron interferences).
In 3-5 Days
USB device featuring a 3D accelerometer, a 3D gyroscope and a 3D magnetometer. This device can measure directly the 2D inclination, the magnetic orientation and provide a 3D orientation esimated based on inertial measurements.
Isolated 4-20mA generator. This is what you need to control by USB any device featuring a 4-20mA input.
Small USB module to read very precisely the output of two 4-20mA sensors. The device can convert the current measure to the equivalent physical measure on the fly, and includes a built-in datalogger.
USB barometric altimeter with integrated data logger