SBC3003_0 SBC4 Single Board Computer

0 out of 5 based on 0 customer ratings

$120.00

Compare

SKU: SBC3003_0

Categories: ,

The SBC3003_0 SBC4 Single Board Computer comes with six integrated VINT ports. If you’ve ever wanted your Phidgets to be further away from your desktop computer than a USB cable can reach, an SBC is the solution. The SBC4 has it’s own small computer which can make your USB Phidgets and VINT devices available over your home network. You can include the SBC4 in your network by plugging it in via ethernet cable, or by connecting a wifi adapter to one of its USB ports.

The VINT SBC exposes an easy to use interface for setting up and running custom applications on-board. This allows the VINT SBC to operate autonomously, without the need for a graphical interface or a consistent remote connection.

The SBC4 is an embedded computer that runs Debian GNU/Linux. We provide full shell access via a built-in SSH server, access to the full Debian package repository, and all of the standard command line tools expected on a modern Linux system.

VINT Ports

With the Phidget SBC4, you can connect six devices and make them available over the network. Each VINT port can perform one of four roles: Communicating with an intelligent VINT Device, reading a 0-5V Voltage or ratiometric sensor, acting as a digital output, or reading switches as a digital input. Each port has a power and ground pin, so you can also use the ports to gain access to the SBC’s 5V supply.

Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.

USB Ports

With its three high-speed USB ports, you can connect a variety of useful devices: USB Phidgets, webcams, keyboards, wifi adapters, and more!

MicroSD Card

The SBC4 comes equipped with a MicroSD card port and 16GB card which gives you plenty of storage space and easy access to your progams and files. The card comes pre-loaded with the operating system and Phidgets drivers.

HDMI Port

The HDMI port on the SBC4 gives it the capability to connect to a monitor to display its Linux terminal. Combined with a USB keyboard, you can type commands or provide program input directly without the need for remoting in via SSH.

Product Specifications of SBC3003_0 SBC4 Single Board Computer

SBC
CPUAllwinner A20
CoreDual-Core ARM Cortex-A7
CPU Speed**Up to 960 MHz
SDRAM Size512 MiB
Boot Time20 s
Ethernet Cable10/100BASE-T
Electrical Properties
Supply Voltage Min6 V DC
Supply Voltage Max30 V DC
Current Consumption Max2 A
Current Consumption Min100 μA
Available External Voltage5 V DC
Available External Current500 mA
USB Hub
Number of USB Ports3
USB SpeedHigh Speed
Available Current per USB Port500 mA
Board
Number of VINT Ports6
Power Jack5.5×2.1mm, Center Positive
Operating Temperature Min0 °C
Operating Temperature Max70 °C
Voltage Inputs
Number of Voltage Inputs6 (Shared)
Voltage Input Resolution* 16 bit
Sensor Input Impedance324 Ω
Input Voltage Min (DC)0 V DC
Input Voltage Max (DC)5 V DC
Voltage Input Noise± 630 μV DC
Sampling Interval Max60 s/sample
Sampling Interval Min1 ms/sample
Digital Inputs
Number of Digital Inputs6 (Shared)
Pull-up Resistance124 kΩ
Low Voltage Max (True)1 V DC
High Voltage Min (False)1.8 V DC
High Voltage Trigger Length Min3 ms
Low Voltage Trigger Length Min3 ms
Digital Input Voltage Max5.5 V DC
Digital Input TypeSwitch (Active Low)
Digital Outputs
Number of Digital Outputs6 (Shared)
Series Resistance510 Ω
Digital Output Available Current81 mA
Digital Output Voltage Min0 V DC
Digital Output Voltage Max3.3 V DC
PWM Frequency Max50 kHz
PWM Resolution0.8 %

*Voltage measured with a 10-bit ADC, oversampled to 16-bits.

**This processor supports dynamic frequency scaling, which lowers the clock speed to save power depending on processing load.