3060_0 USB Isolator

0 out of 5 based on 0 customer ratings

$58.30

Compare

The 3060_0 USB Isolator is designed to protect your PC from harmful voltage that can flow from devices attached to your PC through the USB cable. The isolator is inserted between the Phidgets board and your PC. The USB Isolator can also be used to eliminate problems caused by ground “voltage” differences between USB Host and USB devices. The USB Isolator can be very useful for stabilizing systems. Have a look at the technical information section of the Product Manual.

Useful Cables

You can use the following cables to connect the 3060 – USB Isolator to your PC. Use a Mini-USB to connect the 3060 to your PC and use a Mini-USB or a USB cable to connect your relay, motor controller or InterfaceKit board to the 3060 depending on the connector on your board.

Product Specifications of 3060_0 USB Isolator

Board
Controlled ByUSB
Electrical Properties
Isolation Voltage (DC)1 kV DC
USB Voltage Min4.5 V DC
USB Voltage Max5.4 V DC
Available External Current350 mA
Current Consumption Min29 mA
Available External Voltage5 V DC
Voltage Regulator Efficiency73 %
Physical Properties
Operating Temperature Min-40 °C
Operating Temperature Max65 °C

SKU: 3060_0