Description
This 1062_1B Phidget Stepper Unipolar 4-Motor Controller allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be used in applications that require precise positioning and continuous rotation, at low cost.
Note: The 1062_1B is identical to the 1062_1, except that you have the option of whether you want to include the USB cable.
Note: Because most unipolar motors are resistive limited, the 1062 does not support current control. If your motor requires current control, have a look at the 1067 – Stepper Bipolar HC.
1062_1B Phidget Stepper Unipolar 4-Motor Controller comes packaged with
- A Hardware mounting kit (4 nuts and bolts (M3), 4 plastic spacers)
Warning
 |
Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the Stepper board. |
Product Specifications of 1062_1B Phidget Stepper Unipolar 4-Motor Controller
| Controller Properties | |
|---|---|
| API Object Name | Stepper |
| Motor Type | Unipolar Stepper |
| Number of Motor Ports | 4 |
| Motor Position Resolution | 1⁄2 Step (40-Bit Signed) |
| Position Max | ± 5.49756E+11 ½ steps |
| Stepper Velocity Resolution | 0.75 ½ steps/sec |
| Stepper Velocity Max | 383.3 ½ steps/sec |
| Stepper Acceleration Resolution | 140.6 ½ steps/sec² |
| Stepper Acceleration Min | 140.6 ½ steps/sec² |
| Stepper Acceleration Max | 8895.4 ½ steps/sec² |
| Board Properties | |
| Controlled By | USB (Mini-USB) |
| API Object Name | Stepper |
| Electrical Properties | |
| Available Current per Coil Max | 1 A |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 12 V DC |
| Current Consumption Min | 23 mA |
| Current Consumption Max | 100 mA |
| USB Speed | Full Speed |
| Physical Properties | |
| Power Jack Hole Diameter | 5.5 mm |
| Power Jack Pin Diameter | 2.1 mm |
| Power Jack Polarity | Center Positive |
| Recommended Wire Size (Motor Terminal) | 16 – 26 AWG |
| Recommended Wire Size (Power Terminal) | 12 – 24 AWG |
| Operating Temperature Min | 0 °C |
| Operating Temperature Max | 70 °C |
GTIN00859616006056
SKU: 1062_1B
TITLE: 1062_1B Phidget Stepper Unipolar 4-Motor Controller
